215 low relevance results shown for 'screw clamp'. Prev |1|2|3|4|5|6|7|8|9 | Next | View 100 per page
Showing low relevance matches only. Return to normal search results
215 low relevance results shown for 'screw clamp'. Prev |1|2|3|4|5|6|7|8|9 | Next | View 100 per page
Showing low relevance matches only. Return to normal search results
IEC Recording Timer DC 12V Electronic 25/50Hz Frequency
IEC RECORDING TIMER DC 12V ELECTRONIC 25/50Hz
The IEC two speed (25 and 50Hz) DC Recording Timer is very similar to the LB2670-001 IEC AC Recording timer but generates the 25 and 50Hz electronically from an AC or DC source or 12V AC or DC PlugPak. A slide switch selects t...
Order code: LB2671-005
Clamp Burette Polypropylene Double
A double polypropylene burette clamp with spring loaded clamps to hold the burettes. Supplied with two inserts to allow use with retort stand diameters of about 9.5mm to 13.5mm.
Order code: LW1637-01
IEC Boyles Law High Pressure with Foot Pump
IEC BOYLES LAW HIGH PRESSURE WITH AIR PUMP - NON MERCURY
The IEC high pressure Boyle's Law apparatus performs a similar experiment to MF0340-001 but at higher pressures. Mercury is not used. A small high pressure container with a safe coloured fluid has the pressure raise...
Order code: MF0360-001P
IEC Pulley 50mm Diameter on Rod
IEC 50mm NYLON PULLEY ON ALLOY ROD
A 50mm diameter nylon pulley fixed to the end of an 8mm diameter straight aluminium anodised rod 200mm long. Use with the LB0858-001 IEC Universal Bench Clamp or a retort stand and boss head.
The rod supporting the pulley is straight i...
Order code: MF2600-001
IEC Pulley 50mm Diameter Nylon on Alloy Rod Offset
IEC OFFSET 50mm NYLON PULLEY ON ALLOY ROD
A 50mm diameter nylon pulley fixed to the end of an 8mm diameter aluminium anodised rod 200mm long. Use with the LB0858-001 IEC Universal Bench Clamp or a retort stand and boss head.
The rod supporting the pulley is bent in one ...
Order code: MF2600-020
Pulley - Aluminium - 70mm Diameter - Vertically Mounted on a G Clamp
A 70mm diameter aluminium pulley mounted vertically on a G-Clamp. Can be clamped to a bench or table up to approximately 35mm thick.
Order code: MS0358-01
IEC Dissectible Transformer Iron Core U/I Foot
IEC DISSECTIBLE TRANSFORMER U/I IRON CORE
A replacement Iron Core assembly as included in the EM1660-001 IEC Dissectible Transformer Kit. Complete with 'U' and 'I' with plastic foot to protect benches and special moulded clamp. The iron core section is 35x35mm.
Order code: PA1660-002
IEC Dissectible Transformer Iron Core Clamp
IEC DISSECTIBLE TRANSFORMER IRON CORE CLAMP
A replacement clamp moulded from GFN with moulded-in steel pin to fit the 35x35mm 'U' iron cores as included in the EM1660-001 IEC Dissectible Transformer Kit.
Does not fit the old 40x40mm 'U' cores.
Order code: PA1660-008
IEC Ripple Tank Support Bar Stainless Steel for Ripple Maker
IEC RIPPLE TANK STAINLESS STEEL RIPPLER SUPPORT BAR
A stainless steel support bar for the variable speed rippler (not including clamp collars) of the SW3430-001 IEC Ripple Tank.
Order code: PA3430-006
IEC Ripple Tank Ripple Maker Adjustable Phase 12V Variable
IEC RIPPLE TANK RIPPLE MAKER ADJUSTABLE PHASE 12V VARIABLE
A complete gear driven, adjustable phase, adjustable speed Ripple Generator with integral speed control for the SW3430-001 IEC Ripple Tank.
Powered from any AC or DC power source up to 12V.
Clamps to the stain...
Order code: PA3430-008
IEC Ripple Tank Support Bar for Illuminator
IEC RIPPLE TANK STAINLESS STEEL SUPPORT BAR FOR ILLUMINATOR
A stainless steel bar to support the PA3430-013 illuminator (not including clamp collars) of the SW3430-001 IEC Ripple Tank.
Order code: PA3430-015
Hydro-Electric Generator or Dynamo
This versatile and well made Hydro-Electric Generator (Dynamo) brings hydropower right into your classroom.
Operation:
The Hydro-Electric connects to the tap and the local water supply so that students can directly witness the conversion of water into electricity.
Pro...
Order code: SCHEG
IEC Chladni Plates and Violin Bow and Sand
IEC CHLADNI PLATES WITH VIOLIN BOW AND SAND
Chladni's plates are an interesting way of demonstrating vibrations in flat plates. Fine sand is sprinkled onto the metal plate which is rigidly supported at its centre. Passing a violin bow across the edge of the plate sets the...
Order code: SW0855-001
IEC Vibrator for Strings Meldes App 4-8V AC
MELDE'S APPARATUS - VIBRATOR FOR STRINGS
This compact and robust instrument is used for the lateral vibration of a cord at 50Hz or 60Hz frequency for experiments in standing waves and resonance. It can be free standing, clamped to a bench or supported horizontally or vert...
Order code: SW4220-001
215 low relevance results shown for 'screw clamp'. Prev |1|2|3|4|5|6|7|8|9 | Next | View 100 per page
,